Blog

2026-06-26

Mandatory pre-embedded wall mounting points shall be reserved in all newly built fully furnished residential properties.

Mandatory pre-embedded wall mounting points shall be reserved in all newly built fully furnished residential properties.
The new edition of the Code for Residential Buildings issued by the Ministry of Housing and Urban-Rural Development requires pre-embedded fixtures for TV wall mounting to be installed in the living rooms of commercial housing units. In 2026, the penetration rate of compliant heavy-duty wall brackets supporting fully furnished housing exceeds 60%. Bulk procurement demand from commercial decoration projects keeps rising, and recessed wall niche installation has become a mainstream design solution for home renovation.

Learn More

2026-06-26

TV wall brackets are subject to mandatory CCC certification; uncertified products are prohibited from sale.

TV wall brackets are subject to mandatory CCC certification; uncertified products are prohibited from sale.
The State Administration for Market Regulation has clarified that TV wall-mounted brackets are included in the CCC certification catalogue for household equipment. All products circulated domestically since July 2020 must obtain a 3C certificate. Products shall withstand a static load four times their rated load and complete 10,000 opening and closing cycles under a 50 kg load without fracture or failure. As of 2025, there are over 1,200 certified manufacturers, with the industry compliance rate reaching nearly 90%. Low-cost unbranded counterfeit products without certification marks are being phased out of the market.

Learn More

2026-06-26

Exclusive national standards for TV wall brackets fully implemented, with three safety load grades classified

Exclusive national standards for TV wall brackets fully implemented, with three safety load grades classified
GB/T 44386-2024 Safety Technical Specifications for Wall-Mount Brackets of Household Electronic Equipment was issued at the end of 2024 and officially came into force on July 1, 2025. It is China’s first dedicated national standard specifically for TV wall brackets. The standard classifies products into three load grades: light load (≤15 kg), medium load (15–40 kg), and heavy load (>40 kg). Heavy-duty brackets are mandatory for large screens above 75 inches. It sets rigid mandatory indexes covering steel plate thickness, 10,000-cycle fatigue vibration test, static load deflection and anti-rust coating thickness, regulating the market disorder of inferior thin sheet metal brackets from the source.

Learn More

Drill-free brackets are only applicable to small screens under 32 inches.

Testing institutions across multiple regions remind consumers: The maximum load capacity of adhesive traceless wall brackets is 15 kg. TVs of 43 inches and above weigh over 20 kg, so drill-free installation is strictly prohibited. The risk of adhesive detachment doubles during high temperatures and humid rainy seasons.

26

2026/06

China dominates global production capacity, and its foreign export volume maintains stable growth.

The Asia-Pacific market will achieve an average annual growth rate of 5%–7% from 2026 to 2035. China supplies 70%–80% of the world’s TV wall brackets. Fixed flat-mount brackets account for 45% of base sales, while premium telescopic and motorized models carry much higher profit margins.

26

2026/06

The popularization of intelligent electric telescopic wall brackets is accelerating.

Sales of motorized recessed telescopic brackets with remote and voice control in the high-end market surged 41% year-on-year in 2026. It has become a universal standard for home decoration design that the reserved depth of matching wall recesses shall be no less than 12 cm, with a 2 cm heat dissipation gap around all sides.

26

2026/06

Vibration-Damping Brackets for Extra-Large Screens Become Mainstream R&D Focus

The self-weight of 98-inch and 100-inch MiniLED TVs exceeds 80 kg. Conventional rigid brackets are prone to window and door vibrations, which cause halos and uneven color rendering on the display panel. The industry has launched multi-point support brackets with silicone oil damping vibration reduction, which reduce backboard stress by 62%, making them the standard upgraded solution for screens 75 inches and above.

26

2026/06

Pre-embedded mounting points made compulsory for finished houses

The Code for Residential Buildings (2024 Edition) issued by the Ministry of Housing and Urban-Rural Development stipulates that pre-embedded parts for TV wall mounting shall be reserved in the living rooms of new commercial housing units. In 2025, the penetration rate of compliant matching wall brackets for fully-furnished residential apartments reached 61.4%, and bulk procurement demand from commercial decoration projects keeps rising steadily.

26

2026/06

New Green Manufacturing Regulations for Home Decoration Restrict Bracket Production

The Specification for Green Manufacturing Evaluation of Furniture Metal Products took effect in July 2025. For TV wall brackets, the zinc coating thickness shall be no less than 8μm, and the recycling rate of production wastewater shall reach at least 85%. Leading manufacturers have replaced ordinary plastic spraying with low-VOC electrophoretic coating, significantly raising environmental protection thresholds.

26

2026/06

The exclusive national safety standard has been officially released and implemented

At the end of 2024, the Standardization Administration of China issued GB/T 44386-2024 Safety Technical Specifications for Wall-Mount Brackets of Household Electronic Equipment, which came into mandatory force on July 1, 2025. This is China’s first dedicated national standard for TV wall brackets.

26

2026/06

Inquire Now

We will contact you within one working day. Please pay attention to your phone and email.

Submit Now