Frequently Asked Questions
Get any information you want to know about us and our products. Can't find the answer you want? Please talk to our friendly team.
Are TV wall brackets universal and compatible with all TV brands?
Most mainstream LCD/LED TVs comply with the international VESA hole spacing standard. As long as the spacing of the four mounting holes on the back of the TV falls within the bracket’s supported range, it is compatible with brands including Xiaomi, Skyworth, Hisense, TCL, Sony and Samsung. Curved TVs, old bulky CRT TVs and specially customized ultra-slim bezel-less models require dedicated matching accessories and cannot be used directly with regular brackets.
What is VESA hole spacing? How to check the hole spacing of your TV?
VESA refers to the horizontal and vertical spacing (in mm) of the four fixing screws on the back of a TV. Common specifications include 75×75, 100×100, 200×200, 400×400 and 600×400.
Should size or load capacity be prioritized when purchasing a TV bracket?
Load capacity is the primary criterion. The rated load of the bracket must be at least 1.3 times the total weight of the TV. A load margin of twice the weight is recommended for large-screen TVs (75 inches and above). After that, check the VESA hole spacing and applicable TV size range.
Can brackets for 32-inch small TVs and 85-inch large screens be mixed for use?
No, they cannot. Large-size TVs are much heavier, so their matching brackets are standardly built with thickened cold-rolled steel, widened cross beams and multi-arm reinforced structures. Brackets designed for small 32-inch TVs feature thin cross beams and insufficient load capacity. Forcing them to hold large screens poses a serious risk of the TV falling off.
What is the optimal height for installing a TV wall bracket from the floor?
Standard height for seated viewing: The center of the TV screen shall be 90–110 cm above the floor. For high mounting in living rooms or dining areas where people stand, the height can be raised to 120–130 cm. Use a tilt-adjustable bracket to reduce neck strain from looking down.
How much depth needs to be reserved for wall niches for telescopic TV brackets?
The minimum thickness against the wall is approximately 5–8 cm, with a fully extended length of 40–65 cm. For embedded wall niches, it is recommended to reserve a depth of no less than 12 cm, plus a 2 cm heat dissipation gap around all sides to prevent poor heat dissipation and overheating of the TV.
What tools are required for self-installation? Does the product come with accessories?
The product is standardly equipped with expansion bolts, TV fixing screws, a spirit level and anti-slip gaskets. Tools to prepare by yourself: impact drill, tape measure, marker pen and spanner. Extra long through-wall screws need to be prepared separately for hollow walls.
Can the TV wall bracket be installed without drilling holes?
Drill-free adhesive hooks / traceless brackets are only compatible with small displays ≤32 inches and weighing less than 15 kg. TVs of 43 inches and above have heavy dead weight, and the adhesive cannot bear such loads. Drill-free installation is strictly prohibited due to potential falling hazards.
What are the advantages of the folding bracket (Folding Model 500×550)?
It can be folded and retracted to fit closely against the wall when not in use, saving space. The widened 500×550 base plate distributes weight evenly for enhanced stability. It is detachable and relocatable, allowing repeated assembly and disassembly for rental houses, temporary exhibition halls and outdoor commercial scenarios.
What materials are used for high-quality TV wall brackets? What potential risks do thin sheet iron models have?
Qualified products are made of thickened cold-rolled steel plates with cross beam thickness ≥ 2 mm and electrostatic powder coating on the surface for rust prevention. Thin sheet iron brackets feature falsely marked load capacity; they will deform and suffer weld cracking under long-term stress, which may easily cause the TV to tilt or fall off.